Automatic Recirculation Check Valves (ARC Type)


Application and Function

Automatic Recirculation Check Valves are required to ensure the minimum flow rate of a pump at all times. This protects the pump against superheating, cavitation and finally, destruction. When the flow through the pump falls below a certain level the bypass system opens and the fluid will be recirculated providing the required minimum flow for the pump.

Our Automatic Recirculation Check Valves work in a modulating way. Should the discharge increase through the following processes, then the amount of fluid recirculated by the bypass is automatically reduced - and vice versa. This increases the efficiency of the entire system and optimises the economy in the low-load operation.

The pump protection works entirely over the inside valve technology. The volume by which the process decreases is measured independent of the pressure - the amount returned over the bypass is adapted automatically.

Advantages

  • Reduced weight and overall dimensions for connection system
  • No need to disconnect recirculation line for replacement of ARC Valve wear bypass parts, valve can stay in place, for both sketches
  • Patented bypass system allowing to handle a large range of pressure and flow with perfect tightness
  • Protected against particles due to the fact that the seat is permanently covered by bypass valve
  • Valve and bypass body made of one piece, prevents leakage
  • Cost reduction by reduced dimensions through tangential bypass branch and easy machining
  • Wear parts replacement without disconnecting the valve from the line results maintenance cost reduction
  • Safety by bypass position gauge (optional)

Technical Data


Automatic Recirculation Check Valve (ARC Type)

All rights reserved by ARMATUREN UNION® GmbH. copyright 2013
Valve Type
ARC
Design
forged steel
Nominal Diameter
DN 50 to 750 / NPS 2" to 30"
Pressure Rating
PN 320 / Class 2500
Material
forged material up to Super Duplex; other materials on request